Apple-1 Related Parts
- 1N4001
- 1N914
- A14F
- 8-Pin
- 14-Pin
- 16-Pin
- 24-Pin
- 40-Pin
- 47pF
- .001µF
- .01µF
- .1µF
- 22µF
- 2400µF
- 5300µF
- Trim Pot
- 330Ω
- 390Ω
- 1.2KΩ
- 3KΩ
- 7.5KΩ
- 10KΩ
- 27KΩ
- 8T97B
- 2504V
- 2513N
- 2519B
- 6301
- 6502
- 6820
- 7400
- 7402
- 7404
- 7408
- 7410
- 7427
- 7432
- 7451
- 9316/74161
- 74123
- 74154
- 74157
- 74160
- 74166
- 74174
- 74175
- 74S257
- DRAM
- 555
- DS/MH0025
- 44-Pin
- Crystal
- Heat Sink
- UA7812UC
- LM320MP-5.0
- LM320MP-12
- LM323K
- MPS3704
- 6-Pin Pwr
- 4-Pin Vid
- LM311
- 10K-1%
- ACI_Resistors
- 74LS02
- 74LS10
- 74LS74
- ACI-Audio
- ACI-LED
- ACI-.01µF
- Transformers
- Monitor
1.2KΩ Resistor
(note: the marking on the board is “1.5K” but every picture online I’ve seen of a real Apple-1 has a 1.2K there. I put a 1.5K on my first (Obtronix) replica though and it works fine. In my experience 1.2K 1/4W 5% carbon comps are a little harder to find than other values.)
Allen-Bradley(?) 1/4W, 5%
From a picture of a real Apple 1.
Carbon Composition (same on pre-NTI and NTI). May or may not be Allen-Bradley, need verification.
Total on board: 1.
Allen-Bradley part #: CB1225 RC07GF122J
Allen-Bradley(?)
On my Mimeo replica.
Allen-Bradley(?)
Unused.