From photo of a real Apple-1.
“GE” is not part of label like some others described here.
Total # on pre-NTI board: 4.
Total # on NTI board: 8 (used in place of 1N4001s).
Another photo of a real pre-NTI Apple-1.
Another photo of a real NTI Apple-1.
Not as round as the version on the real pre-NTI Apple-1. Black bar is below the lettering, same as Apple-1.
On my Mimeo replica.
Made by ?
Black bar is above the lettering in this version.
Same size as A14F, see spec sheets for electrical differences.
GE A115E and F
Larger than A14F, see spec sheets for electrical differences. Thicker leads fit in holes labeled “MR500” and “1N4001” on Newton boards, but only “MR500” holes on Mimeo boards.
Desoldered from vintage ‘70s Atari boards. The two on the left appear very similar to the photos of the real Apple-1 above. The two on the right are very similar to those on my Mimeo replica.